Cold/Warm Reset (Reset) - Motorola M68CPU32BUG User Manual

RESET
3.26 COLD/WARM RESET
RESET
Use the RESET command to specify the reset operation level when a RESET exception is
detected by the processor. Press the RESET switch on the M68300PFB platform board to
generate a reset exception.
Two RESET levels are available:
COLD
WARM
EXAMPLE
CPU32Bug>RESET<CR>
Cold/Warm Start = C (C/W)? W<CR>
CPU32Bug>
CPU32Bug Debugger/Diagnostics - Version 1.00
(C) Copyright 1991 by Motorola Inc.
Warm Start
CPU32Bug>
M68CPU32BUG/D REV 1
Cold/Warm Reset
This is the standard mode of operation, and is the default at power-up. In
this mode all the static variables are initialized every time a reset is
executed.
In this mode all the static variables are preserved when a reset exception
occurs. This is convenient for keeping breakpoints, offset register values,
the target register state, and any other static variables in the system.
Set to warm start.
Press the RESET pushbutton.
3-56
DEBUG MONITOR COMMANDS
RESET