Motion Sensor; Function Buttons; Reset Button; External Ports - Motorola MK3000 Product Reference Manual

1 - 4 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Motion Sensor

The motion sensor detects motion in front of the MK3000 to trigger scanning.

Function Buttons

The MK3000 has four programmable function buttons (see
Arrow, Enter, and Escape from left to right, by default. You can remap these buttons to other functions using
the following registry key:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
Refer to the standard scan code table for key values. Defaults for the MK3000 function buttons are:
"Key1"=dword:00000048
"Key2"=dword:00000050
"Key3"=dword:0000001C
"Key4"=dword:00000001

Reset Button

Press and hold the reset button for 10 seconds to reboot the device.

External Ports

The MK3000 has the following external ports:
Power Port
A Motorola power supply connects to the power port (2.0 mm barrel jack connector) on the MK3000. For more
information, see Power Connection on page
Mini-USB Ports
The MK3000 includes a Mini-USB 1.1 host/client port and two Mini-USB 1.1 host ports for peripheral
connections. For more information, see
RJ45 Ethernet / 10/100Base-T
Wired/Wireless Ethernet: Power through AC Outlet
The Ethernet / 10/100Base-T (10-conductor RJ45) port accommodates Ethernet data connection. The
MK3000 receives power through the Symbol approved power supply.
Wired Ethernet: Power through Power-over-Ethernet
The MK3000 supports Power-over-Ethernet (POE). An Ethernet (10/100Base-T) cable connected to the
Ethernet port provides both data communication and power to the MK3000.
MicroSD Card Slot
The MK3000 contains a slot for microSD cards of up to 32 GB.
Figure
2-3.
USB Connection to a PC and Peripherals on page
1-1) that correspond to Up Arrow, Down
2-5.