Changing A File Name (For Save/E-Mail Attachment) - Fujitsu iScanner fi-6010N Operator's Manual

6.14.2 Changing a File Name (for Save/e-Mail Attachment)

When a job is processed, file names to be used when saving or attaching scanned data to an e-mail
can be changed.
HINT
1. Press a job button on the "Job Menu" screen.
2. On the "File Name" screen, enter the file name for the scanned data to be saved or
sent by e-mail.
File names may be up to 128 characters long. \ and / are used as folder separator characters.
The following symbols cannot be used.
: * ? " < > |
The default value is the file name specified in the "Common File Name" input field on the
"Job Details" window. For details, refer to
HINT
It is not possible to change a file name when the "File Name" screen is set
not to be shown.
When sequence numbers are set to be appended to file names, a
sequence number is appended to the end of the default file name. The
guidance message "A sequence number will be appended to the file
name." is shown on the screen.
A sequence number will not be appended to a file name that has been
edited.
After entering the file name, press the [Scan] button to start the scan. If
any further job setup steps are required, press the [OK] button that
appears instead.
6.14 Processing a Job
"4.11.2 Setting a Job Sequence" (page
fi-6010N Network Scanner Operator's Guide
194).
6
363