Fujitsu iScanner fi-6010N Operator's Manual page 99

6. Press the [Now] button.
The system is restarted.
If the new scanner name is the same as another device name already in
HINT use on the network, communication problems will occur. In this case, try
the following steps:
1. Disconnect the LAN cable, and press the [Shutdown] button on the
2. Reboot the scanner with the LAN cable disconnected, and enter a
3. Reboot the scanner again.
4. Re-connect the LAN cable to the scanner.
The connection will be lost if the scanner name is changed via the network
interface. To continue with other settings, wait a short time for the device to
restart, then login to the network interface again.
LCD touch panel to turn the scanner off.
non-duplicate scanner name.
fi-6010N Network Scanner Operator's Guide
4.6 Using the System Settings Menus
4
61