Fujitsu iScanner fi-6010N Operator's Manual page 313

4. Press the [Scan&Send] button.
When [Scan Viewer] is On, this will be a [Scan] button.
Scanning starts.
After the last page is displayed on the "Scanning" screen, the scan data is sent by fax, and
the LCD touch panel screen returns to the "Main Menu".
[Scan Viewer] is initially "Off".
HINT
When the [Scan] button is pressed (when [Scan Viewer] is "On"), each
page is briefly shown on the screen as it is scanned.
The maximum number of pages that can be scanned is 999.
When [Blank Page Skip] is enabled, the number of scanned pages
excluding skipped blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until
the maximum number of scanned pages is reached.
When the scan has completed, the "Scan Viewer" screen opens.
For more details about the "Scan Viewer" screen, refer to
Disabling the Scan Viewer" (page
Data in the Scan Viewer" (page
A delivery report message with the following title is sent by e-mail from
the scanner to the "Notification To (Sender's e-Mail Address)" address.
6.5 Sending the Scanned Data by Fax
Network Scanner (XXXX) Error
fi-6010N Network Scanner Operator's Guide
346)" and "6.11 Editing the Scanned
349).
6
"6.10 Enabling/
275