Fujitsu iScanner fi-6010N Operator's Manual page 535

Code
110D0002 Cannot connect to the LDAP
server.
110D000F Cannot connect to the LDAP
server. Check that the LDAP
access settings are correct and
that the LDAP server is running
and accessible.
110D0004 Access to network folder was
refused.
110D0005 Number of network path
connections has reached the
maximum allowed. No more
may be specified.
110D0006 Invalid LDAP Search Base
format.
Message
Try the following:
Try the following:
Contact a server administrator to find out if
an access permit has been set.
Close unneeded network connections, then
try specifying the desired network path
again.
Contact a system administrator to have the
LDAP search base format corrected.
"4.7.8 Setting the Login LDAP Server"
(page 105)
fi-6010N Network Scanner Operator's Guide
Action
The network settings may not be valid.
Contact a system administrator to have
the network settings checked.
"8.3 Network Connection
Troubleshooting" (page 400)
The server may not be working. Contact
a system administrator to have the server
status checked.
If using SSL communication when
connecting to the LDAP server, contact
an administrator to check if the server
certificate, issued from a root
certification authority, is installed on the
LDAP server.
Enter a valid user name and password.
The network settings may not be valid.
Contact a system administrator to have
the network settings checked.
"8.3 Network Connection
Troubleshooting" (page 400)
The server may not be working. Contact
a system administrator to have the server
status checked.
If using SSL communication when
connecting to the LDAP server, contact
an administrator to check if the server
certificate, issued from a root
certification authority, is installed on the
LDAP server.
Enter a valid user name and password.
E
497