Paper Requirements; Paper Type; Paper Weight; Precautions - Fujitsu iScanner fi-6010N Operator's Manual

A.2 Paper Requirements

A.2.1 Paper Type

The following paper types are recommended for use with the ADF:
Woodfree paper
Wood containing paper
When documents of a paper type other than those listed above are used, test-scan a few sheets first
to check if the document can be scanned without problem.

A.2.2 Paper Weight

The following paper weights can be used with the ADF:
For general scanning
52 to 127 g/m
For A8 and Business Card size, 127 g/m
For scanning with a Carrier Sheet
Up to 127 g/m
Up to 63.5 g/m

A.2.3 Precautions

The following documents may not scan successfully:
Documents of non-uniform thickness (e.g. envelopes and documents with attachments)
Wrinkled or curled documents (See the following HINT)
Folded or torn documents
Documents with appended photographs, notes, etc.
Tracing paper
Coated paper
Carbon paper
Carbonless paper
Photosensitive paper
Perforated or punched documents
Documents that are not square or rectangular
Exceptionally thin documents (less than 52 g/m
Photographs
Do not attempt to scan the following types of documents:
Paper-clipped or stapled documents
Documents on which the ink is still wet
Documents smaller than A8 Portrait
Documents wider than Letter size (8.5inches = 216mm, A4 is 210mm wide)
Non-paper documents (such as fabric, foil, transparent paper)
2
(14 to 34 lb)
2
(Up to 34 lb)
2
(Up to 17 lb) (when scanning half fold paper)
fi-6010N Network Scanner Operator's Guide
2
only
2
)
A
423