Fujitsu iScanner fi-6010N Operator's Manual page 486

Screen
Network
Printer
448
Message
Access was refused. Login is not
possible at this time.
Access was refused. The specified
account is currently locked out.
Access was refused.
Operation not possible. Network path
is not working.
Not connected to the network.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Length of specified network printer
path exceeds the maximum selectable
path length. This printer may not be
selected.
Cannot acquire network information.
Specified user is no longer able to
login to this network printer.
Action
Try the following:
Try again when login is
possible.
Contact a network administrator
to have the time setting
changed.
Contact a network administrator.
Contact a server administrator to
find out if an access permit has
been set.
Contact a server administrator.
Check that the system network is
functioning normally by
performing a ping test from
another machine in the network,
other than the server with network
printer. If the system network is
not operating properly, refer to
"Failure to connect to a server
using its IP address" (page 405)
further solutions.
Close unneeded network
connections, then try specifying
the desired network path again.
Select a different network printer
and try again.
Contact an administrator for the
specified server.
The specified user account has
expired.
Try the following:
Login with a different account.
Contact a network administrator
to have the account validated.
for