Printer Description - DCA Intertel s’print BT User Manual

PRINTER DESCRIPTION

The printers consists of a ABS-V0 casing (1) equipped with a cover (2)
under which is housed the paper roll and print mechanism. On the front is the multi-
function key (3) and red LED (4).
Multi-function key. This key is used to access a variety of printer option sdepen-
ding on how long it is held down. If the printer is off (red LED off), when this key
is pressed power is turned on (blinking red LED). To turn the printer off the key
is pressed two times (the LED begins to blinkfaster) and if it is not pressed again
within three seconds the printer shuts off. During the power-up phase, if the key
is held down for at least three seconds, the printer enters the configuration mode
and prints out a printer setup report. When the print-out is complete, the printer
remains in stand-by to receive characters from the serial interface that are printed
out in hexadecimal code. If the key is pressed, the printer by-passes the setup mode
and terminates the hexadecimal dump function. Pressing the key quickly will exit
the configuration mode, while if it is held down for at least a second, it is possible to
make changes in the individual parameters.
DCA Intertel 9 DCA Intertel