DCA Intertel s’print BT User Manual page 52

[Description] Transmits the printer ID specified by n follows:
[Notes] • This command is executed when the data is processed in
the data buffer. Therefore, there could be a time lag between
command reception and data transmission, depending on
data buffer status.
[Default]
[Reference]
[Example]
GS U
[Name] Resets the printer parameters to default.
[Format] ASCII
Hex
Decimal
[Description] Resets the printer parameters to the default configuration.
[Notes] • After executing this command the printer is initialized.
[Default]
[Reference]
[Example]
GS W n d1 ...dn
[Name] Prints n byte of a 200 dpi graphic line
[Format] ASCII
Hex
Decimal
[Range]
0 d"?d1 ... dn d"?255
[Description] Print n byte of a 200 dpi graphic line where :
• n specifies the number of byte to print;
• d1...dn specify the bytes to print.
DCA Intertel
GS U
1D 55
29 85
GS W
1D 57
29 87
1 d"?n d"?48
n d1... dn
n d1... dn
n d1... dn
52 DCA Intertel