Installtion And Use; Connections; Battery Recharger - DCA Intertel s’print BT User Manual

1. Installtion and Use

1.1 CONNECTIONS

1.1.1 Battery Recharger

For the Battery Recharger/Power Supply and serial connection, the printer is equipped
with a connecting cable (fig. 1.2) that comes packed with the printer and has a double
connection system. On one side is a 9-pin female connector (fig. 1.2.A) for the serial
port; on the other side of the same connector is a RJ11 connector (fig. 1.2.B) and a
jack (fig. 1.2.C) for connection to the battery recharger.
The printer is equipped with a rechargeable battery pack, located in the
battery compartment (2), self-sufficient for printing. To recharge the
batteries, use the connection cable (fig. 1.2) that comes packed with the
printer and following the instructions reported in the 1.2.1 paragraph.
DCA Intertel 11 DCA Intertel