DCA Intertel s’print BT User Manual page 44

[Default]
[Reference]
[Example]
0FH
[Name] Set CRLF mode
[Format] ASCII
Hex
Decimal
[Description] Inhibits the command $0D maintaining enabled only the command
$0A for printing
[Notes] • To disable this option, reset the printer
• This command clears the line buffer
• On switching on the default value is in the Option Register
[Default] Setting in the option register by means of the front keys
[Reference] 0DH
[Example]
11H
[Name] Graphic mode
[Format] ASCII
Hex
Decimal
[Description] Enables graphic mode:
a line in 24 column mode corresponds to 144 horizontal dots
divided into 24 blocks of 6 dots each; a line in 40 column mode
corresponds to 240 horizontal dots divided into 40 blocks of 6 dots
each.
[Notes] To obtain graphic printing, enter the command $11 at the beginning
of each line. The format of the byte in graphic
configuration is:
X R
D7
where:
X is not used (0 is recommended);
R must be fixed at level 1;
P1,.P6 are the graphic dot data (1 prints, 0 does not print). The P6
bit of the string of dots transmitted is printed on the left and the
others follow from left to right (P5, P4, P3, P2,P1) as shown:
1st byte à
P6 P5 P4 P3 P2 P1
[Default]
[Reference]
[Example] To print a line of dots, transmit:
$11, n x $7F (where n is the number of characters per line), $0D.
To print an empty line, transmit:
$11, $40, $0D.
DCA Intertel
0FH
-
0F
15
-
11
17
P6 P5 P4 P3
D6 D5 D4 D3
2nd byte à
P6 P5 P4 P3 P2 P1
44
P2 P1
D2 D1 D0
3rd byte à
P6 P5 P4 P3 P2 P1
DCA Intertel