DCA Intertel s’print BT User Manual page 47

[Notes] • Same as hardware reset
• After the command has been transmitted, 1.5 seconds elapse
before the printer is enabled
[Default]
[Reference]
[Example] This can be useful during switching on in order to avoid the sending
of false characters during initialization by the master device
ESC A [nH] [nL]
[Name] Executes [n] dots line feed
[Format] ASCII
Hex
Decimal
[Description] Executes [n] dots line feed.
[Notes]
[Default]
[Reference]
[Example]
(dd) ESC M
[Name] Writes the value (dd) in the print mode
[Format] ASCII
Hex
Decimal
[Description] Sets the print mode default parameters:
$00 small character printing
$01 double width printing
$02 double height printing
$03 expanded printing
[Notes] • The setting is stored in the EEPROM
[Default] Setting by means of the front keys
[Reference] ESC m
[Example] For double height printing, transmit:
$30 $32 $1B $4D
ESC N
[Name] Set normal mode printing
[Format] ASCII
Hex
Decimal
[Description] Select normal mode printing:the receipt feeds out of the printer with
the printing upside down running from right to left
[Notes]
[Default] Setting in option register by means of front keys
[Reference] ESC R
[Example]
DCA Intertel
ESC A nH
1B 41 nH
27 65 nH
dH dL ESC M
dH dL 1B 4D
dH dL 27 77
ESC N
1B 4E
27 78
47
nL
nL
nL
DCA Intertel