1.3.2 Configuration Mod. DPT100-BT
The printer set up print out (see fig. 1.10) includes a range of information,
and among these should be pointed out the HEAD VOLT parameter that
indicates the battery charge level, i.e., the print head battery voltage.
The printer's configurable parameters, with Bluetooth interface selected, are:
• Interface:
• BT Name ID(14):
• Authentication(15):
• Autofeed:
• Battery:
• Standby:
• Print mode:
• Alignment:
• Print density:
DCA
Intertel
BTD, RS232.
NO IDD, #0, #1, #2, #3, #4, #5, #6, #7, #8, #9.
Enabled, DisabledD.
CR disabledD o CR enabled.
1000 mAh, 1100 mAh, 1200 mAh, 1300 mAh, 1400 mAh,
1500 mAh, 1600 mAh, 1700 mAh, 1800 mAh, 1850 mAhD,
Alkaline(10).
1min, 5minD, 10 min, 30 min, 1 h, 2h, None.
NormalD, revers.
DisableD, Enable.
-2, -1, 0D, +1, +2.
19
DCA
Intertel