DCA Intertel s’print BT User Manual page 49

[Reference]
[Example]
ESC c
[Name] Management of bar code printing
[Format] ASCII
Hex
Decimal
[Description] [ASCII code] Type of bar code
I Interleved 2/5
C Code 39
B CodaBar
e EAN8
E EAN13
[height]
Number of dot lines in 1/8 mm. units.
[position]
Left hand margin, expressed in 1/8 mm. units
[options]
bit bit 0 bit 1
bit0: check digit is not printed is printed
bit3,2: HRI 0=no 1=above 2=below 3=above & below
bit5,4: size 0=normal 1=double 2=triple 3=quadruple
[maximum length]
Interleaved 2/5 = 12 characters
Code 39 = 10 characters
CodaBar = 10 characters
EAN8 = 8 characters
EAN13 = 13 characters
[data]
Expressed in ASCII
[Notes]
[Default]
[Reference]
[Example]
ESC m
[Name] Transmits the print mode in serial
[Format] ASCII
Hex
Decimal
[Description] Transmits the print mode configuration on the serial port
[Notes] • If the printer is using the parallel protocol, nothing with be
transmitted
[Default] Setting in the option register by means of the front keys
[Reference] SC B
[Example] The response is on two bytes. E.g. if you receive:
$30, $32
it means that printing is in double height mode
DCA Intertel
ESC c [code] [height] [position] [options] [length]
[data]
1B 63
27 99
ESC m
1B 6D
27 109
49 DCA Intertel