Table of Contents
Advertisement
1.3 CONFIGURATION
1.3.1 Configuration Mod. DPT100-B/I
The printer set up print out (see fig. 1.9) includes a range of information, and
among these should be pointed out the HEAD VOLT parameter that
indicates the battery charge level, i.e., the print head battery voltage.
The printer's configurable parameters are:
• Interface:
• IR Protocol(9):
• Baud Rate:
38400, 19200, 9600D, 4800, 2400, 1200, 600.
• Data length:
7, 8D bits/car.
• Parity:
NoneD, even or odd.
• Handshaking:
XON/XOFFD or Hardware(10).
• Autofeed:
• Battery:
1000 mAh, 1100 mAh, 1200 mAh, 1300 mAh, 1400 mAh,
1500 mAh, 1600 mAh, 1700 mAh, 1800 mAh, 1850 mAhD , Alkaline(11).
• Standby:
• Alignment:
DisableD, Enable.
• Print density:
-2, -1, 0D, +1, +2.
DCA
Intertel
RS232D, Infrared(8).
Enable, DisableD.
CR deactivatedD or CR activated.
1min, 5minD, 10 min, 30 min(12), 1 h, 2h, None.
17
DCA
Intertel
Advertisement
Table of Contents
