Irda Protocol Overview (Only Dpt100-I Model) - DCA Intertel s’print BT User Manual

2.3 IrDA PROTOCOL OVERVIEW (only DPT100-I model)

This paragraph contains a general overview information about IrDA protocol
implemented on the printer. For further detrils about the complete IrDA
standard specifications are available from the IrDA website www.IrDA.org.
The IrDA standard specifies the following protocols:
• Physical Signaling Layer (PHY)
• Lynk Access Protocol (IrLAP)
• Lynk Management Protocol/Information Access Service (IrLMP/IAS)
The IrDA data lists optional protocols. These are:
• Tiny TP
• Ir Tran-P
• IrOBEX
• IrLAN
• IrCOMM
• IrMC
• IrDA Lite
Figure 2-6 shows the IrDA data protocol stack and which components are
implemented by the printer.
Printer
Note 1: the printer implements the 3-wire Raw service class.
DCA Intertel 32 DCA Intertel