Call Forwarding - Siemens OpenStage 40 Operating Manual

Basic functions
Step by Step
46

Call forwarding

HiPath 8000 also supports system-based call for-
warding. These functions are described on
page 108.
You should never combine phone-based call
forwarding with system-based call forwarding in
HiPath 8000.
You can forward calls for your phone to another phone.
On multi-line telephones (
only configure call forwarding for the primary
line.
Three forwarding conditions can be programmed in the
forwarding menu:
• All Calls
• Busy
• No reply
Because of its direct impact, "All Calls" call forwarding
has the highest priority followed by "No reply" and
"Busy".
If active, "All Calls" call forwarding is indicated on the
graphic display when the phone is idle.
Forwarded calls can be logged in a call list (see
page 29).
There are three Destination options in the Edit call for-
warding menu. These destination options are assigned
to the forwarding types.
All calls (off/on)
Destination
Busy (off/on)
Destination
No reply (off/on)
Destination
One phone number may already be assigned to each
destination. The destination option could then be Desti-
nation 12345, for instance.
page 11), you can