Cti Calls - Siemens OpenStage 40 Operating Manual

Enhanced phone functions
Step by Step
User
Configuration
Incoming calls

CTI calls

Auto-answer
Yes
Beep on auto-answer
Yes
Save & Exit
72
CTI calls
Beep on auto-answer
Speakerphone mode automatically activates on your
phone if you use a CTI application such as Outlook to
dial a number when Auto-answer is active. If Auto-an-
swer is not active, the phone rings first and you have to
press the loudspeaker key or lift the handset to set up
the call. This setting also defines whether or not incom-
ing calls are automatically accepted. If the function is
active, an alert beep sounds when an incoming call is
automatically accepted.
z You can also configure this setting via the Web interface
page 136.
Prerequisite: The option was programmed by your ad-
ministrator.
N
Press the key shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.