Siemens OpenStage 40 Operating Manual page 99

Step by Step
User
Security
User password
Confirm password
Save & Exit
Deactivate User Password
If a password has been set beforehand, you can disable
the password prompt at the phone.
The deactivation of the password request is not
valid for the web interface
the OpenStage Manager, and also not for CTI ap-
plications requiring a password request. Here,
you must enter "000000" as password.
If you deactivate the user password, you cannot
lock the phone
user menu is not password protected.
z You can also configure this setting via the Web interface
page 136.
N
Press this key repeatedly until the "Settings" menu be-
comes active.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
h
if nec.
Press this key to delete the previous password.
j
Enter 6 zeros ("000000") to deactivate the password (for
text entry, see
Select and confirm the option shown.
j
Enter 6 zeros ("000000") once more and confirm.
Select the option shown and confirm twice.
page 136, not for
page 100 any more, and the
page 22).
Privacy/security
99