Rollover For A Line - Siemens OpenStage 40 Operating Manual

Making calls with multiple lines
Step by Step
94

Rollover for a line

Your administrator can determine how rollover calls are
to be signaled.
T
Only the relevant line key blinks.
or
Z T
You hear a special advisory tone via the currently ac-
tive microphone and the corresponding line key blinks.
or
Z T
The ringer melody set sounds briefly (approx.
3 seconds) via the loudspeaker and the corresponding
line key blinks.
Z T k
The telephone rings using the configured call signal, the
corresponding line key blinks, and a pop-up menu con-
taining the available information is displayed.
The ringer melody is not played in speakerphone
mode.