Christie Projector User Manual page 29

Maintenance & Care
Power Cord and
Attachments
27
"
Only use attachments or accessories recommended by Christie, such as
the specific power cord supplied. Use of other attachments or
accessories with this projector may result in the risk of fire, shock or
personal injury.
WARNING
Use only the AC power cord supplied. Do not attempt operation if the
AC supply and cord are not within the specified voltage and power
range.(see section 6)
"
Do not allow anything to rest on the power cord. Locate the projector
where the cord can not be abused by persons walking on it or objects
rolling on it.
"
Operate the projector at the specified voltage only. Do not overload power
outlets and extension cords as it can result in fire or shock hazards.
"
The projector is equipped with a three wire plug having a third (grounding)
pin. This is a safety feature. If you are unable to insert the plug into the
outlet, contact an electrician to have the outlet replaced. Do not defeat
the safety purpose of the grounding-type plug.
"
Always turn off the power before connecting cables and other
connections. Read the instruction manuals of the other equipment
connected to the projector thoroughly. Fire or electrical shock may occur
when these operations are performed if the main power is turned on.
"
Do not touch the electrical plug when there is thunder or lighting.
Touching the projector in this condition may cause electrical shock.
"
Do not place the electrical cord near a heater or other objects that
generate high temperatures.
"
Inspect the electrical plug periodically. Fire or electrical shock may occur
if the insulation on the electrical plug becomes defective.
"
Always pull out the electrical plug when the unit is not used for a long
period of time. If the plug is not removed, the insulation may deteriorate
and cause electrical shock or a fire due to current leakage.
"
Always grasp the plug firmly and never pull on the electrical cord to
remove the electrical plug from the wall outlet. If the cord is pulled, it may
be damaged and cause fire or electrical shock.
"
Never touch the electrical plug with wet hands.