Phone Region - ZyXEL Communications AX Series User Manual

Table 117 VoIP > Phone > Phone Device > Edit
LABEL
Immediate Dial
Enable
Cancel
OK

21.5 Phone Region

Use this screen to configure settings that depend on which region of the world the Zyxel Device is in.
Selecting the region where the device is physically located improves the quality of phone calls. To
access this screen, click Voice > Phone.
Note: You need to reboot the device after changing the region settings for it to take effect.
Figure 204 Voice > Phone
The following table describes the labels in this screen.
Table 118 Voice > Phone
LABEL
Region Setting
Call Service Mode
Apply
Cancel
Note: You need to reboot the device after changing the region settings for it to take effect.
Chapter 21 VoIP
DESCRIPTION
Select this if you want to use the pound key (#) to tell the Zyxel Device to make the
phone call immediately, instead of waiting for the number of second you selected
in the Dialog Interval Selection field of the VoIP > SIP > SIP Service Provider > Add
New Provider or Edit screen.
If you select this, dial the phone number, and then press the pound key. The Zyxel
Device makes the call immediately instead of waiting. You can still wait, if you want.
Click Cancel to exit this screen without saving
Click OK to save your changes.
DESCRIPTION
Select the place in which the Zyxel Device is located.
Select the mode for supplementary phone services (call hold, call waiting, call
transfer and three-way conference calls) that your VoIP service provider supports.
• Europe Type – use supplementary phone services in European mode.
• USA Type – use supplementary phone services American mode.
You might have to subscribe to these services to use them. Contact your VoIP
service provider.
Click this to save your changes and to apply them to the Zyxel Device.
Click this to set every field in this screen to its last-saved value.
AX/DX/EX/PX Series User's Guide
301