This chapter describes the Maintenance screens that display system information such as ZyNOS
10.1 Maintenance Overview
The maintenance screens can help you view system information, upload new firmware, manage configuration
and restart your ZyAIR.
10.2 System Status Screen
Click MAINTENANCE to display the screen, where you can use to monitor your ZyAIR. Note that these
labels are READ-ONLY and are meant to be used for diagnostic purposes.
The following table describes the labels in this screen.
LABEL
System Name
Maintenance
Figure 10-1 System Status
Table 10-1 System Status
This is the System Name you enter in the first Internet Access Wizard screen. It is
for identification purposes
ZyAIR G-500 Wireless Access Point User's Guide
firmware, port IP addresses and port traffic statistics.
DESCRIPTION
Chapter 10
Maintenance
10-1