Log Setting Screen - ZyXEL Communications NWA Series User Manual

Summary screen to edit this information for all logs at the same time.

18.3.1 Log Setting Screen

To access this screen, click Configuration > Log & Report > Log Setting.
Figure 123 Configuration > Log & Report > Log Setting
The following table describes the labels in this screen.
Table 87 Configuration > Log & Report > Log Setting
LABEL
Edit
Activate
Inactivate
#
Status
Name
Chapter 18 Log and Report
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific log.
This field shows whether the log is active or not.
This field displays the name of the log (system log or one of the remote servers).
NWA/WAC/WAX Series User's Guide
196