Solid-State Drive (Ssd) - HP EliteBook 840 G1 Service Manual

Solid-state drive (SSD)

Description
256-GB, Self-encrypting drive (SED), SSD
240-GB, SSD
180-GB, SSD
128-GB, SSD (for use only in HP EliteBook 15 models)
120-GB, SSD
32-GB, SSD
Before removing the solid-state drive module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the service cover (see
5.
Disconnect the battery.
Remove the solid-state drive:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the computer.
Service cover on page 48).
Component replacement procedures
Spare part number
731194-001
732680-001
732678-001
744483-001
732681-001
743008-001
53