Fingerprint Reader Assembly - HP EliteBook 840 G1 Service Manual

Fingerprint reader assembly

Description
Fingerprint reader assembly for use in HP EliteBook 840/HP ZBook 14 models (includes cable,
bracket, and insulator)
Fingerprint reader assembly for use in HP EliteBook 850 models (includes cable, bracket, and
insulator)
Before removing the fingerprint reader assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Service cover (see
b.
Battery (see
c.
Fan (see
d.
Keyboard (see
e.
Base enclosure (see
Remove the fingerprint reader assembly:
1.
Turn the computer upside down.
2. Remove Mylar cover from atop the that secure the fingerprint reader assembly (1).
88 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service cover on page
Battery on page 50)
Fan on page 77)
Keyboard on page
Base enclosure on page
48)
62)
71)
Spare part number
730956-001
730817-001