Supermicro X9DRD-iF User Manual page 99

NIC Configuration
Link Speed
Use this feature to change the link speed and duplex for the current port. The op-
tions are AutoNeg, 10Mbps Half, 10Mbps Full, 100Mbps Half, and 100Mbps full.
Blink LEDs
This feature allows the user to specify the duration for LEDs to blink. The range
is from 0 ~ 15 seconds.
PORT CONFIGURATION INFORMATION
This section displays the following port information:
•
UEFI Driver
•
Adapter PBA
•
Chip Type
•
PCI Device ID
•
PCI Bus:Device:Function
•
Link Status
•
Factory MAC Address
•
Alternate MAC Address
4-23
Chapter 4: AMI BIOS