Supermicro X9DRD-iF User Manual page 17

•
•
•
PC Health
•
Monitoring
•
•
•
•
•
•
•
System
Manage-
ment
•
•
•
•
•
Dimen-
sions
Note 1: For IPMI Configuration Instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
Note 2: Changing BMC log-in information is recommended during initial
system power-on. The default username is ADMIN and password is
ADMIN. For BMC best practices, please refer to: http://www.supermicro.
com/products/nfo/files/IPMI/Best_Practices_BMC_Security.pdf
Power-on mode for AC power recovery
Intel® Intelligent Power Node Manager (NM) (Available
when the NMView utility is installed in the system)
Management Engine (ME)
CPU Monitoring
Onboard voltage monitors for 1.8V, +3.3V, 3.3VSB, +5V,
+5V SB, +12V, Chipset Voltage, and Battery Voltage.
CPU 5-Phase switching voltage regulator
CPU/System overheat LED and control
CPU Thermal Trip support
Thermal Monitor 2 (TM2) support
Fan Control
Fan status monitoring with firmware 4-pin (Pulse Width
Modulation) fan speed control
Low noise fan speed control
PECI (Platform Environment Configuration Interface)
2.0 support
UID (Unit Identification)/Remote UID
System resource alert via SuperDoctor® III
SuperDoctor® III, Watch Dog, NMI
Chassis Intrusion Header and Detection
13.00" (L) x 10.30" (W) (330.20 mm x 261.62 mm)
1-9
Chapter 1: Overview