Installing the Fan
Hardware (not to scale)
Perma•Lock™ Downrod and
Ball Assembly (1)
Canopy Hatch (1)
Assembling
1
Remove the paper shield from the motor.
2
Examine the interior of the motor coupling. If
the end of the set screw is inside the motor coupling
space, use the Allen wrench to loosen the screw.
Allen Wrench (1)
Canopy (1)
Wire Nuts (4)
Incandescent Uplight
Bulbs, 25W (6)
STEP 1
Paper motor
shield
STEP 2
Set screw - CORRECT PLACEMENT
Allen wrench
Set screw - INCORRECT PLACEMENT
Allen wrench
Continental
2½" x 8-32 Canopy Screw (1)
and Lock Washer (1)
™
11