Figure 24 Station Mode: Profile: Wireless Settings; Table 13 Station Mode: Profile: Select A Channel - ZyXEL Communications ZyXEL ZyWALL 1 User Manual

ZyXEL G-220 v2 User's Guide
The following table describes the labels in this screen.

Table 13 Station Mode: Profile: Select a Channel

LABEL
Wireless Settings
Channel
3 If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2,
WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data
encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP
encryption method. Otherwise, select DISABLE to allow the ZyXEL G-220 v2 to
communicate with the access points or other peer wireless computers without any data
encryption and skip to step 5.

Figure 24 Station Mode: Profile: Wireless Settings

4 The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the ZyXEL G-220 v2. Refer to
information on wireless security configuration.
48
DESCRIPTION
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Section 3.3.2 on page 39
Chapter 3 Wireless Station Mode Configuration
for detailed