ZyXEL AG-220 User's Guide
The following table describes the labels in this screen.
Table 13 Station Mode: Profile: Select a Channel
LABEL
Wireless Settings
Channel
3 If you selected Infrastructure network type in the first screen, select WEP, WPA,
WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data
encryption. If you selected Ad-Hoc network type in the first screen, you can only use
WEP encryption method. Otherwise, select DISABLE to allow the AG-220 to
communicate with the access points or other peer wireless computers without any data
encryption, and skip to step 5.
Figure 38 Station Mode: Profile: Wireless Settings
4 The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the AG-220. Refer to
wireless security configuration.
64
DESCRIPTION
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Section 4.3.1 on page 55
for detailed information on
Chapter 4 Wireless Station Mode Configuration