Toshiba ESTUDIO170F Operation Manual page 75

One Touch Dialer Registration - continued
6
Enter the Telephone
Number - continued
The telephone number is dis-
played on the bottom row of the
LCD display as you enter it.
Confirm that the number is cor-
rect.
FAX NUMBER (MAX128)
[9583359 ]
Then press:
ALT NUMBER (128 MAX)
[ ]
7
Enter an Alternate
Number (Optional)
Alternate Numbers are optional.
If the remote location does not
have two or more facsimile
units in the same area, you can
leave this entry blank. (See
page 71 for more information.)
Enter the Alternate Facsimile
Number.
Then press:
NAME (20 MAX)
[ ]
8
Enter the Location
ID Name
Enter the Location ID name of
the remote party to be as-
signed to the current One
Touch Dial Number.
See page 36 for more informa-
tion on Character Entry.
When the name is displayed
correctly on the LCD display,
press:
FAX OPTIONS
2.NO
1.YES
NOTE:
To skip the Location ID
Name, press the or
STOP
to go to the next
step.
9
Select Communication Options
(Advanced Setup)
This setting will allow you to
specify one or more of the fol-
lowing Communication Options
for the One Touch Number you
are registering.
Delayed Communication
Default=off
Select to program a trans-
mission start time.
Transmission Report
Default=off
Enables or disables the
printing of a TX Report.
Line Monitor
Default=off
Enables or disables the line
monitor speaker during dial-
ing.
Fax Speed
Default=off
Selects a lower modem
speed for poor communica-
tion links.
Sub Address
Default=none
Specifies a Sub Address for
the One Touch Dial Number
being registered. The re-
mote unit must support
Sub-Address capabilities.
9a
Select the
Communication Option
To skip the Communication
Options, press:
Go to Step 10.
To select Communication Op-
tions, press:
When "1.YES" is selected, the
FAX OPTIONS screen ap-
pears. Follow the next steps for
each item selection.
FAX OPTIONS
1.DONE
2.DELAYED COMM.
3.TX REPORT
4.LINE MONITOR
5.FAX SPEED
6.SUBADDRESS
These items are outside
the LCD frame. To view
them, use the
scroll key.
73