Setting Recovery Transmission - Toshiba ESTUDIO170F Operation Manual

Setting Recovery Transmission

Recovery Transmission allows
the operator to re-transmit a
document after failing the ini-
tially specified number of redial
attempts.
If Recovery Transmission is
set to ON, the document is
stored in memory for a speci-
fied length of time. You may
retransmit the document within
this time period without re-
scanning the original docu-
ment.
Display the
1
RECOVERY
TRANSMIT Menu
Press:
MENU
+
+
+
+
RECOVERY TX
2.ON
1.OFF
2
Select the Recovery
Transmit Option
To turn ON Recovery Trans-
mission, press:
Go to Step 3.
To turn OFF Recovery Trans-
mission, press:
When "OFF" is selected, the
"COMPLETED" message will
be displayed. The facsimile re-
turns to the Standby Mode.
STORE TIME
(1-24) [ 8]
3
Enter the STORED
TIME
Enter the stored time length
(01 to 24, in unit of hours).
Then press:
When completed, the following
screen is displayed for about 2
seconds. Press
STOP
to return to the Standby
Mode.
COMPLETED
145