Relay Originator Report Setting - Toshiba ESTUDIO170F Operation Manual

Relay Originator Report Setting

1
Display the RELAY
ORIGINATOR Menu
Press:
MENU
+
+
+
+
+
+
RELAY ORIGINATOR
1.ALWAYS
2.ON ERROR
3.OFF
184
2
Select the Option for RELAY ORIGINATOR
Select the desired option to
print a report whenever a Relay
transmission is sent.
NOTE:
This is only applicable if the
e-STUDIO170F is used as
an Originator for a relay
transmission (see page
117).
To ALWAYS print a report
whenever a document is trans-
mitted, press:
To only print a report when an
error occurs, press:
SHOW FIRST PAGE
1.ON
2.OFF
Go to next step.
To turn OFF Automatic printing
of reports, press:
The following screen is dis-
played for 2 seconds to confirm
your selection.
COMPLETED
STOP
Press to complete this
setting.
3
Set the Option for
SHOW FIRST PAGE
To print a first page image of
the document on the transmis-
sion report, press:
To not print a first page image
of the document on the trans-
mission report, press:
The following screen is dis-
played for 2 seconds to con-
firm your selection.
COMPLETED
STOP
Press to complete this
setting.