Quick Boot; Quiet Boot - Foxconn Inferno Katana User Manual

Boot Settings Configuration
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Boot Settings Configuration

Quick Boot

Quiet Boot

Bootup Num-Lock
Wait For 'F1' If Error
Hit 'DEL' Message Display
Interrupt 19 Capture
↑↓←→:Move Enter:Select
► Quick Boot
While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Bootup Num-Lock
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: [On] (default) and [Off].
► Wait For 'F1' If Error
You can set whether to press [F1] key if error occurs in the POST(Power On Self Test).
► Hit 'DEL' Message Display
This item is used to enable or disable system dispalys the "Press DEL to Enter Setup" in POST.
► Interrupt 19 Capture
When set to [Enabled], BIOS allows option ROMS to trap interrupt 19.
Boot Settings Configuration
Enabled
Enabled
Enabled
On
Enabled
Enabled
Disabled
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
40
Help Item
Allows BIOS to Skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
F1:General Help