Table of Contents
Advertisement
2-8 onboard leD
Core Nerve (Only for Inferno Katana):
There are ten LEDs under the "Quantum Force" light.
Their flashing frequency is following the power loading.
The power loading is heavier, the leds flash faster. User
can check the loading in time through this light.
Core Nerve
fuzzy equalizer (only for Inferno Katana):
Fuzzy Equalizer can offer efficient power when user need
it. It identifies one LED reprsents two phases power. All
the six LEDs flashing means the motherboard are using
twelve phases power.
Do not remove or plug in any device when the onboard LED is lighting on.
2-9 BIOS Debug Code Description
1. i-Tweaker BIOS Debug Code
a. It means that DebugCode appear to 7 segment LEDs by i-Tweaker when you can see two
DOT symbols such as 5.0. at 7'seg LEDs, otherwise is BIOS debug code.
b. i-Tweaker first debug code is meaning of PCB version that i-Tweaker can supported.
Ex: A.A. means PCB A, B.B. means PCB B... etc.
c. i-Tweaker second debug code is meaning of i-Tweaker version. It should be combined with
PCB version such as AA01, AA02, BB01, BB02 and etc.
Debug Code
Description
0.0.
i-Tweaker AC Ready.
5.0.
All ready. Wait for power button click to boot machine.
5.1.
On power sequence, but power button event fail.
5.2.
On power sequence, wait S_SLP_S4 event.
5.3.
On power sequence, wait S_SLP_S3 event.
5.4.
On power sequence, pass S_SLP_S3 and S_SLP_S4 event.
5.5.
On power sequence, but 1.8V PLL cannot ready.
5.6.
On power sequence, when 1.8V PLL is ready.
5.7.
On power sequence, but Vdimm cannot ready.
20
20
Fuzzy Equalizer
Hide quick links:
Advertisement
Table of Contents
