Ahci Configuration - Foxconn Inferno Katana User Manual

AHCI Configuration

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
AHCI Settings
AHCI BIOS Support
► AHCI Port0
► AHCI Port1
► AHCI Port2
► AHCI Port3
► AHCI Port4
► AHCI Port5
↑↓←→:Move Enter:Select
AHCI Settings
► AHCI BIOS Support
The Advanced Host Controller Interface (AHCI) specification describes the register level
interface for a Host Controller for Serial ATA. The specification includes a description of the
hardware/software interface between system software and the host controller hardware. AHCI
provides more advanced features including SATA features, but some SATA drives may not
support AHCI, unless they are labeled with AHCI support in its specification.
This item is used to enable or disable your motherboard to support the AHCI specification.
► AHCI Port0/1/2/3/4/5
These options display the status of IDE devices. BIOS auto detects the presence of IDE
devices while entering setup.
AHCI Configuration
Enabled
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
33
Help Item
Enables for supporting
F1:General Help