Exit Raid Bios - Foxconn Inferno Katana User Manual

exit RAID bIoS

1. Take TryRAID5 as an example, select "5. exit" in main menu and press <Enter>.
The screen displays :
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 TryRAID5
Physical Disks:
Port Drive Model
0 Maxtor STM332082
2 WDC WD1500ADFD-0 WD-WMAP42036047
3 WDC WD800AAJS-00 WD-WMAP95242993
4 WDC WD3200AAKS-0 WD-WCARW4154961
2. Press <Y> to exit Intel
3. Shut down the computer, remove the Non-RAID disk, and we will continue for
Windows OS installation. If you do not remove irrelevant hard disk, Windows may
detect it during the installation, and you could be confused.
4. Remove any diskette from floppy drive.
5. Restart computer to start Windows installation.
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved. Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[
[ DISK/VOLUME INFORMATION
Level
RAID5(Parity) [
Are you sure you want to exit? (Y/N):
Serial #
6QF4CRAW
[↑↓]-Select [ESC]-Exit
Matrix Storage Manager program. The system will reboot.
®
MAIN MENU ]
3. Reset Disks to Non-RAID 3. Reset Disks to Non-RAID
4. Recovery Volume Options
5. Exit
]
Stripe Size
CONFIRM EXIT 64KB 149.1GB ]
Size
298.0GB
139.7GB
74.5GB
298.0GB
[ENTER]-Select Menu
104
Status Bootable
Normal Yes
Type/Status(Vol ID)
Member Disk(0)
Member Disk(0)
Member Disk(0)
Non-RAID Disk