Onboard Device Configuration - Foxconn Inferno Katana User Manual

OnBoard Device Configuration

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
OnBoard Device Configuration
HDA Controller
VIA 6308S 1394 Device
Realtek 8111D LAN Device
Realtek 8111D LAN BootROM Disabled
Marvell 6121 PATA and eSATA eSATA + IDE
↑↓←→:Move Enter:Select
► HDA Controller
This item is used to enable or disable the HD Audio controller.
► VIA 6308S 1394 Device
This item is used to enable or disable the VIA 6308S 1394 device.
► Realtek 8111D LAN Device
This item is used to enable or disable the Realtek 8111D LAN device.
► Realtek 8111D LAN BootROM
This item is used to enable or disable the Realtek 8111D LAN BootROM.
► Marvell 6121 PATA and eSATA
You may set your PATA and e-SATA to [eSATA+IDE] mode or [RAID+IDE] Mode (RAID for e-SATA,
IDE for PATA). We are using Marvell chip to control PATA and e-SATA devices.
OnBoard Device Configuration
Enabled
Enabled
Enabled
Enabled
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
37
Help Item
Options
Enabled
Disabled
F1:General Help