Foxconn Inferno Katana User Manual page 96

6. It will skip "Strip Size" menu for RAID1.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
7. In "Capacity" item, use the default value, and press <Enter>. The size of the smaller
hard disk 139.7GB is becoming the default value, and it indicates the maximum
capacity.
8. Select "Create Volume" and press <Enter>. A warning message will appear:
Press <Y> to create the volume and return to the main menu.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 TryRAID1
Physical Disks:
Port Drive Model
0 Maxtor STM332082
2 WDC WD1500ADFD-0 WD-WMAP42036047
3 WDC WD800AAJS-00 WD-WMAP95242993
4 WDC WD3200AAKS-0 WD-WCARW4154961
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved. Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
The default value indicates the maximum capacity using the selected
disks. Entering a lower capacity allows you to create a second
volume on these disks
[↑↓]-Change [TAB]-Next
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[
[ DISK/VOLUME INFORMATION
Level
RAID1(Mirror)
Serial #
6QF4CRAW
[↑↓]-Select [ESC]-Exit
]
TryRAID0
RAID0(Stripe)
Select Disks
128KB
139.7 465.8 GB
Create Volume
[ HELP ]
[ESC]-Previous Menu [ENTER]-Select
MAIN MENU ]
3. Reset Disks to Non-RAID
4. Recovery Volume Options
5. Exit
]
Stripe Size
128KB 139.7GB
Size
298.0GB
139.7GB
74.5GB
298.0GB
[ENTER]-Select Menu
89
Status Bootable
Normal Yes
Type/Status(Vol ID)
Member Disk(0)
Member Disk(0)
Non-RAID Disk
Non-RAID Disk