Boot - Foxconn T70S Series User Manual

Boot

Main
Boot Configuration
Bootup Numlock State
Quiet Boot
Fast Boot
INT19 Trap Response
▶ CSM parameters
Set Boot Priority
1st Boot
2nd Boot
3rd Boot
4th Boot
5th Boot
6th Boot
7th Boot
8th Boot
▶ USB HardDisk Drive BBS Priorities
▶ USB KEY Drive BBS Priorities
▶ UEFI Boot Drive BBS Prioriies
► Bootup Numlock State
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Fast Boot
This item is used to enable or disable boot with initialization of a minimal set of devices required
to launch active boot option. This is no effect for BBS boot options.
► INT19 Trap Response
Enable this item can allow Option ROMs to trap Interrupt 19.
► Set Boot Priority
These items are used to set the system boot order.
► Hard Disk Drive BBS Priorities / CD/DVD ROM Drive BBS Priorities/USB Floppy Drive
BBS Priorities / USB CD/DVD ROM Drive BBS Priorities / USB HardDisk Drive BBS
Priorities / USB KEY Drive BBS Priorities / NETWORK Device BBS Priorities / UEFI Boot
Drive BBS Priorities
This items appear only when the devices are available. Use this items to specify the boot
device priority sequence of the detected devices.
f-center Advanced Boot
Version 2.15.1236. Copyright (C) 2013 American Megatrends, Inc.
Power Health Security
Select the keyboard
[On]
NumLock state
[Enabled]
[Disabled]
[Enabled]
[Hard Disk]
[CD/DVD]
[USB Floppy]
[USB CD/DVD]
[USB Hard Disk]
[USB KEY]
→ ←: Select Screen
[Network]
↑ ↓/Click: Select Item
[UEFI]
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
BIOS SETUP
Save&exit
27