Foxconn Inferno Katana User Manual page 88

6. It is now entering "Strip Size" menu. Use Up or Down arrow key to select the desired
strip size. The available values range from 4KB to 128KB. The strip value should be
selected based on different applications. Some suggested choices are :
16K - Best for sequential transfer.
64K - Good general purpose strip size.
128K - Best performance for most desktops and workstations .
The default value is 128K for RAID0. Press <Enter>.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
7. In "Capacity" item, the default value indicates the maximum capacity using the selected
disks. As we want to introduce how to create two disk volumes (like logical devices C:
and D:) in a RAID0 system, so we only key in 298GB here to build the first volume.
Later, we will also describe how the second volume is generated. Input 298GB, and
press <Enter>.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved. Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
The following are typical values:
[↑↓]-Change [TAB]-Next
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved. Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
The default value indicates the maximum capacity using the selected
disks. Entering a lower capacity allows you to create a second
volume on these disks
[↑↓]-Change [TAB]-Next
]
TryRAID0
RAID0(Stripe)
Select Disks
128KB 128KB
298 GB
N/A
Create Volume
[ HELP ]
RAID0 - 128KB
RAID10 - 64KB
RAID5 - 64KB
[ESC]-Previous Menu [ENTER]-Select
]
TryRAID0
RAID0(Stripe)
Select Disks
128KB
298 465.8 GB
Create Volume
[ HELP ]
[ESC]-Previous Menu [ENTER]-Select
81