GE D20MX User Manual page 70

70
5.4. Click OK.
Result: The Firmware Information window closes.
5.5. Click Close.
Result: The Firmware Library window closes.
6. Export the RADIUS roles from the default configuration:
6.1. Double-click the D20 device named FAC_DEF.
Result: The Application List popup appears.
6.2. Double-click the WESMAINT II+ application.
Result: The WESMAINT II+ table icon set appears.
6.3. Right-click the RADIUS Role Table icon and select Export
Result: The Export Options dialog appears.
6.4. Click on the button containing an ellipsis (...) under the Place export files in area.
Result: The Choose a folder dialog appears.
6.5. Browse to a folder (e.g. your Desktop) and click OK, OK, and Cancel.
Result: The main page of the project appears.
7. Export the IP Redundancy Monitor point descriptors from the default configuration:
7.1. Double-click the D20 device named FAC_DEF
Result: The Application List popup appears.
7.2. Double-click the System Point Database application.
Result: The System Point Database Properties dialog appears.
7.3. Select IP Redundancy Monitor and click Descriptors.
Result: The Point Descriptors dialog appears.
7.4. Click on the Export button.
Result: The Export Point Descriptors dialog appears.
7.5. Click OK.
Result: The Browse For Folder dialog appears.
7.6. Browse to a folder and click OK, OK and OK.
Result: The main page of the project appears.
8. Close the D20MX Factory Default Configuration (i.e. SAG0001 or SAG0002):
8.1. Click GE > Close Project.
Result: The Close Project window appears.
8.2. Select: SAG0001 or SAG0002.
8.3. Click OK.
9. Open the SGConfig project containing the D20 device.:
9.1. Click the GE button.
9.2. Click the required SGConfig project in the Recent Projects list or select the
Open Project menu item.
10. Make a backup copy of the original D20 device configuration:
10.1. Click the Project tab of the original D20 device configuration.
10.2. Click the D20 device.
10.3. Click the ribbon Configure group > Edit > Copy.
10.4. Click a blank area on the page onto which the copy is to be placed.
10.5. Click the ribbon Configure group > Edit > Paste.
Result: The Copying device window appears.
Result: Once completed a new device named COPY_OF_<original device
name> appears.
CHAPTER 5: CONFIGURING THE SOFTWARE
GENERAL D20MX HARDWARE USER'S MANUAL