Configure The Ip Address - Bosch VIP X1600 Base Quick Information Manual

EN | 10

7. Configure the IP Address

• Install the program Configuration Manager from the CD-ROM provided. To do so start the
Setup.exe file in the ...\Configuration Manager folder on the CD-ROM.
• Start the Configuration Manager when installation is completed. The network is scanned for
compatible devices automatically.
• When a VIP X1600 module is listed, click the entry and click the tab Network, located in the
right frame.
• Enter the desired IP address (e.g. 192.168.0.16) in the Unit IP address field and click the but-
ton Set at the bottom on the right. The new IP address is valid after a reboot of the unit.
Quick Installation Guide | VIP X1600 Base
Bosch Security Systems | 2006-08 | V2.0