BC Biomedical PS-2200 series User Manual page 9

BLOOD PRESSURE
Blood pressure simulation varies between the members of the PS-2200 Family. There are
models with 1,2 and 4 blood pressure outputs.
Both static and dynamic invasive pressures are simulated. In the static mode, the BP
outputs are fixed at the selected level or sequenced through the list using the Automatic
mode selection.
In the Dynamic mode, the selected waveform is synchronized with the ECG and provides a
continuous output. Additionally, a Respiration Artifact may be added.
A special Swan-Ganz mode is available that will allow Manual or Automatic simulation of
that sequence.
Each channel has independent settings.
• STATIC:
• AUTOMATIC STATIC PRESSURE MODE
• 8 DYNAMIC WAVEFORMS
• RESPIRATION ARTIFACT:
• SENSITIVITY:
• SWAN-GANZ SIMULATION
• 7 PRESET STATIC GROUPS (MODEL PS-2240 ONLY)
TEMPERATURE
The unit will simulate seven temperatures. This is done by providing the necessary ohmic
levels for both the YSI 400 and 700 Series thermistors.
• YSI 400 SERIES and 700 SERIES SIMULATION
• SELECTIONS:
LEAD TEST FUNCTION
The unit provides a set of test terminals to quick check leads. It will determine if a lead has
less than 1000 Ohms resistance.
-10,-5,0,20,40,50,60,80,100,150,
160,200,240,250,300,320,400 mmHg
0 to 16 mmHg
5uV/V/mmHg and 40uV/V/mmHg
0,24,30,35,37,40,42 °C
(32.0,75.2,86.0,95.0,98.6,104.0,107.6 °F)
7
Description