BC Biomedical PS-2200 series User Manual page 66

PS-2200
SystemSetup:
Auto Timer Off
Backlight Time
Backlight Intensity
Contrast Adjust
Power Up With
Auto Step Time
Swan-Ganz Step Time
Last
If this option is selected, the unit will remember the settings that were being used when it
was turned off and bring them back when the power is turned on.
Custom
If this option is selected, the user may save a unique set of default parameters and the unit
will recall them every time the power is turned on.
Set Current as Custom
To create the set of custom default parameters, this fourth choice is provided in this
parameter. The user simply configures the unit to the desired default conditions, selects
this option and presses
Power up values.
30 min
5 sec
100%
10
Default
5 sec
15 sec
. The current configuration is then saved as the Custom
64