BC Biomedical PS-2200 series User Manual page 41

Alternately, to see a submenu of all the options for a highlighted parameter, use
Use to scroll to the desired option. Then
setting.
Auto Static Pressure
If Auto Static Pressure is selected, the channel will automatically sequence through all of
the Static Pressure settings, starting with -10 mmHg, incrementing at a fixed interval. The
interval may be set in the System Setup Menu under "Auto Step Time."
NOTE: Each channel can be set independently.
The key can be used to exit the Auto Mode during the sequence.
BLOOD PRESSURE
39
Blood Pressure
is used to accept the new
Displays time (seconds)
remaining before advancing
to next static pressure.
.