Page 2
No responsibility is assumed by BC Group for the use or reliability of software or equipm ent that is not supplied by BC Group. Trademarks BC Biomedical and PLA2000 are trademarks of BC Group International Inc.
Page 3
CONTENTS INTRODUCTION……………….………………..….…..2 II. WARNINGS..............2 III. OPERATION ..............3 IV. SPECIFICATIONS............4 V. WARRANTY..............5 VI. TECHNICAL SUPPORT..........6...
Page 4
INTRODUCTION Congratulations on your purchase of the BC Biomedical Model PLA Pacer Load Adapter. The PLA works with the BC Biomedical Defibrillator/Pacemaker Analyzer to provide a range of simulated patient loads for transthoracic or external invasive pacemakers. A total load resistance of 50Ω, 100Ω, 300Ω, 500Ω, 600Ω, 1000Ω, or 1500Ω...
Page 5
III. OPERATION WITH DA-2000P and DEFIBRILLATOR WITH TRANSTHORACIC PACEMAKER Additional Equipment Needed: • 2 alligator clips (P/N 48009) • 1 (2mm-female to 4mm-male banana jack) • 1 banana test lead Attach the PLA to either paddle electrode of the DA-2000P, by placing it on top of the electrode. (See Figure 1.) Cover the other DA-2000P electrode with the black protective cover that is included with the PLA.
Page 6
SPECIFICATIONS Input Connections: Seven banana jacks provide input connections. Inputs are labeled with the total load impedance in ohms. The banana jacks mate with standard size banana plugs (0.166” diameter by 9/16” long). Output Connections: The output of the Load Adapter connects to a paddle input (electrode) of the DA-2000P.
Page 7
WARRANTY This Warranty is limited and applies only to new products, except for computer-based software which is covered under a separate Warranty Policy, manufactured by BC Group International, Inc. BC Group International, Inc. makes no warranty whatsoever regarding the condition of used products. BC Group International, Inc.
Page 8
TECHNICAL SUPPORT BC Biomedical’s Pacemaker Load Adapter is backed by a superior support sta . If the PLA ever fails to work perfectly, please contact the Technical Support Sta . Written Communications You may write a letter with your comments and send it to: BC Biomedical BC Group International, Inc.
Need help?
Do you have a question about the PLA and is the answer not in the manual?
Questions and answers