Respiration - BC Biomedical PS-2200 series User Manual

NOTE: The delta ohm Respiration Signal can be inserted in either the LL or LA lead. The
Baseline impedance can be set to 500, 1000, 1500 or 2000 Ohms. These must be set to
correlate with the monitoring equipment before simulation can begin. (See SETUP for
selection information).
There are 12 rate settings available (9 BrPM rates, Apnea (0 BrPM) and 3 timed Apneas).
The display will resemble the following:
RATE
12 sec Apnea
22 sec Apnea
32 sec Apnea
Apnea
15 BrPM
20 BrPM*
30 BrPM
40 BrPM
60 BrPM
80 BrPM
100 BrPM
120 BrPM

RESPIRATION

ECG/RESPIRATION/TEMPERATURE
* Indicates Default Setting
(See Power Up Settings)
49
AMPLITUDE
0.1 Ω
0.2 Ω
0.5 Ω
1.0 Ω*
2.0 Ω
3.0 Ω